Gear Motors For Greenhouse

The EP Greenhouse Gearbox is a compact and lightweight reduction gearbox with an integrated limit switch system that’s suitable for assembly of a locally available electric engine. The Gearbox can be used in manually-controlled or climate-managed ventilation and display screen systems in greenhouses. The quick and easy-to-installEP Gearbox is certainly rainproof and windproof. The Gearbox has a high protection course (IP65) and can be used in an ambient temperature of 0-60 °C.

The low-noise Gearbox for Greenhouse includes a gearwheel transmission and a worm wheel transmission, which are integrated in an aluminium precision housing. The self-braking worm wheel transmission means that the drive shaft is usually locked when the decrease gearbox is not running. The fully sealed reduction gearbox comes with an expansion chamber with a diaphragm to keep carefully the gear essential oil at a minimal pressure under all situations, even at high temperatures. Gear motors for Greenhouse Thanks to the utilization of an expansion chamber, the Gearbox could be installed in any placement. There are no restrictions, because there is no dependence on a bleed plug. The sealed reduction gearbox keeps the apparatus oil of the Gearbox in ideal condition for its entire operating lifetime. The Gearbox is suitable for discontinuous use, working class s3-30%, with a maximum activation time of 25 minutes.

The Gear box reduction gearbox has an FT85 motor assembly flange, to which the right IEC standard motor can certainly be installed (EN 50347).

The Gear box includes a rotating limit switch system with operating switches and circuit breakers (NC contacts) for turning off by the end positions. The limit switch system is installed within an included chamber and is usually enclosed by an impact-resistant plastic-type cover. The limit change system is obtainable and simple to adjust. The limit change system’s optimum switching range is usually 40 or 64 revolutions of the drive shaft. The cabling is linked in spring-clip connections. The Gearbox has an IP68 M16 x 1.5 cable gland (5-9 mm cable) for the cable feed-through.

The Gearbox for greenhouse comes with 16 teeth 5/8”x3/8” sprockets, keys and fasteners. The accompanying chain couplings and assembly plates can be found as accessories.

Optimum drive torque of 150 Nm or 450 Nm.
Rotational speeds of 3 or 5 rpm for a mains frequency of 50 Hz or 3.6 or 6 rpm for a mains frequency of 60 Hz in case of app of 4-pole electric motor.
Protection class IP65.
May be used in ambient temperatures of 0-60°C.
Suitable for discontinuous use, operating class s3-30%, optimum activation time 25 a few minutes.
Equipped as standard with 16-tooth galvanised chain coupling 5/8″x3/8″.
FT85 motor assembly flange for installation of IEC regular motor (EN 50347).
Maximum switching range of limit switch system 40 or 64 revolutions of the drive shaft.
IP68 M16x1.5 cable gland for cable feedthrough (5-9 mm cable).