hydraulic planetary drive

Single and double reduction planetary equipment drives to be used with electric, hydraulic, atmosphere motors or mechanical power insight from high rate, low torque sources to provide decreased speeds at increased torques. The input part has standard SAE pads for electric motor mounting. Obtainable in the three result Plastic Gear Rack configurations shown below. Many units can be furnished with an integral parking brake.
One reduction drives are limited to 3500 RPM input; double reduction drives to 5000 RPM. Units with integral parking input acceleration is bound to 2500 RPM.The same torque comes in either direction of rotation. Torque ratings are intermittent. For continuous operation reduce torque rankings to about 1/3 to 1/2 the values shown. Products provide 95% power tranny efficiency.

Wheel Drive
Input side has regular SAE pads and splined input. Output part has hub for mounting automobile wheel. Free wheel can be done by using the springtime disconnect to disengage the drive shaft. The disengage feature is regular on all wheel drives.

Shaft Output
Input side standard SAE pads with splined input. Output side options include: Keyed circular, hexed, hollow, tapered or splined shaft.

Spindle Drive
Input side is regular SAE pads with splined input. Output side has a flanged spindle for coupling to the strain.

Swing Drives
Ever-Power model 6 is offered with or without integral parking brakes. The “SW” Power Wheel provides extra-huge tapered roller bearings, a ductile iron hub and heat treated ring gear to minimize backlash growth due to wear. The exterior bearing nut supplies the best in shaft retention and shaft strength. Output can be a spindle shaft or various sizes of essential pinion gears.