Weld On Hubs

Weld-On Hubs are available in 3 styles to match the user’s preference for bushing installation types. They happen to be stocked for apply with:
TB Bushings
QD Bushings
DST Bushings
All MasterDrive Weld-On Hubs are machined from steel.
Weld-On Hubs are commonly used in blend with plate type sprockets and conveyor pulleys to supply for even more shaft engagement.
Are manufactured to accept Taper Lock Bushings. Two styles can be found. Type S and Type W. Type S offers a shorter length through the bore, and Type W a far more identified registration flange to aid with positioning and concentricity for welding.
Are manufactured to simply accept a QD style flanged bushing.

Accepts DST-Twice Split Taper style bushings.
These bushings are keyed to both the shaft and hub. The exterior key provides positive drive with no torque on the cap screws. DST bushings enable the highest torque carrying capability.
The nitro weld on hubs are bored to size hubs that can be utilised with weld on sprockets, pulleys or even custom applications. Our hubs are an “X series” hub, this means they’re appropriate for any “x series” sprockets or pulleys. Sprocket X hubs can be purchased in finished bore, square bore, hex bore, idler and splined bore. Bore sizes range between 1/2″ ID up to 1-1/2″ ID. The Nitro weld on hubs are manufactured from 1045 CD (wintry drawn) steel and finished with a black oxide coating.
Weld-On Hubs are made of steel, drilled, tapped and taper bored to receive Tapered
Bushings. They are extremely valuable for welding into pulleys, plate sprockets, impellers,
agitators and many other devices which must be firmly fastened to the shaft.
Weld-upon hubs are created from 1015-1025 steel, drilled, tapped and taperbored to get the taper-lock bushing. They are useful for welding into lover Weld On Hubs china rotors, pulleys, plate sprockets, etc., which should be firmly attached onto shafting. Four types of hubs are available from stock.
Weld-about hubs are made from low carbon steel once and for all welding compatibility. They are of help for welding into admirer rotors, impellers, agitators, etc., which require secure installation to the shaft. A typical type comes in addition to the one that is specifically suitable for use in the end disc of a conveyor pulley.
Type S Taper-lock – formerly made for use in smaller sprockets, now well suited for a great many other lighter-duty applications
Type W/WA Taper-lock – rugged, full-duration size for single-hub, heavy-duty applications
Type F – features a greater flange diameter that can be welded into standard steel tubing to fabricate conveyor pulleys or perhaps process rolls
Type K – smaller sized design, especially useful for two-hub engineering, such as for example conveyor pulleys Taper-lock bushings
Both are made of steel material with rugged, compact patterns to support most bushings sizes.
Ever-Power is a reliable dealer of precision weld-on hubs. Weld-on hubs can be used for welding to produce “B” or “C” design sprockets and for other applications. Particular dimensional hubs are available per your requirements on a made-to-buy basis.
Manufactured from Steel to supply a convenient methods to secure supporter rotors. Steel pulleys, platewheel sprockets, impellers etc. to a shaft. The Shouldered outer diameter allows for easy location. Taper bored to suit taper lock bush sizes 1210-5050.
Chain & Drives share the complete range of Weld-On Hubs to check our coupling, pulley and sprockets inventory in a nutshell reach and extended reach models. They may be applied in assisting the use of taper suit bushes to melt your gear to a motivated shaft.
Taperfit or QD weld-on hubs are for work with in the fabrication of conveyor pulleys, plate sprockets, lovers and impellers. Weld-on hubs are created from low carbon steel for good welding compatibility.

Weld-about hubs are made from 1015-1025 steel, drilled, tapped and taperbored to receive the Taperfit bushing. They are of help for welding into admirer rotors, pulleys, plate sprockets, and should be firmly installed onto shafting. Four types of hubs are available.
Weld on hubs can be found in many different styles such as: stock bore, surface finish bore, Q-bushed, taper-bushed, and BM-bushed. These hubs are produced from bar steel and utilized for welding to produce “B” design sprockets that include inventory bore, finished bore, as well as varieties of bushed sprockets. Specialized hub dimensions can be found per your technical specs on a made-to-buy basis.