900 CLASS SUGAR MILL CHAINS 901 902 907 5174

900 SERIES PINTLE CHAINS, sometimes referred to as “sugar mill” or “intermediate carrier chain” is utilized extensively in sugar mills. Multiple strands of 900 Pintle Chain, available with a couple of holes per link, could be fitted with overlapping beaded carrier slats to form a continuing apron conveyor for intermediate carrier services.
The pin holes at the closed end of the 900 Class link are provided with smooth bushings which are press-fitted in to the links and keyed into place. The bushings are renewable and may be powered out and replaced if they become worn. 900 Class Pintle Chain was created with dual barrels, one on each aspect of the open up end of the links, to accommodate double sprockets. The purpose of this driving method is to remove the possibility of materials build-up in the sprocket contact area, which frequently causes the chain to jump the sprocket. Large ribs rigidly reinforce these driving barrels.
Our 900 Course chain links, with tensile power from 22,500 to 32,500 pounds, are available with large sliding surfaces to reduce chain wear and prolong chain lifestyle. Broad wearing areas and weighty cross sections synergy to provide a considerable link which is made according to manufacturer’s requirements and may perfectly replace links made by other manufacturers.
Brutaloy sprockets for 900 Class Pintle Chain are plentiful in 3.170 inches. 900 Class Pintle Chain should only be allowed to travel in a single direction; links should run in direction of their shut narrow end.
Available in cottered construction just, 900 Class Chain is assembled with T-headed pins which are locked into place by two lugs cast upon the ends of the generating barrels to avoid pin rotation. Pin rotation during procedure would lead to wear within the bushing. Both head of the pin and the cottered end of the pin are shielded by cast lugs on the barrel end of the links.
Material
900 Class Pintle Chain are links cast of malleable iron or Transmission Chain Promal (Duramal). It really is furnished with carbon steel heat treated pins and carbon metal case hardened bushings as standard. However, stainless steel pins and bushings could be provided when specified.