electric fan motor

Fan Motor, 1/8 hp 120V 2.2 Amp 3-Speed
General Explanation: New fan motor, removed from unused 18” or 24” China Atmosphere Compressor diameter TPI fans. Designed to operate an 18” or 24” enthusiast blade (blade NOT included).
This motor comes with a (detached) cord with grounded plug, motor capacitor and a 3-speed control switch. All the wiring in the middle of your electric engine, capacitor and quickness control change is still installed however the cord itself is generally detached as seen in the photos. (Find “Control Notice” below for change type.)
T (See “Software Notice” below for utilize in a variety of other applications.)
Dimensions: The engine body is 5” diameter and 3 ½” long (not including the shaft). The engine shaft is usually½” (0.500″) diameter x 2 ½” lengthy with a collection screw soft. There are (4) threaded mounting lugs on the front of the motor, ½” long x .16 dia. with washers and nuts. The studs may actually ‘ve got 4mm threads and to become on a 117mm (4.6”)diameter circle (3 ¼” measured from one stud to another).
Rate: The approximate electric motor speeds (with a enthusiast blade attached):1660, 1550 and 1370 RPM. Path of rotation (facing the shaft end of the electric powered motor) is Clockwise.

Control Take notice: Motors will come with The 3-swiftness rotating control KNOB OR a 3-speed PULL-CHAIN SWITCH (we’ve demonstrated BOTH versions in the images). Both of these types of switches both control the engine just as (but you possess a rotating knob and you have got a pull-chain). In the event that you order several engine at a time, we can do our best to supply your order with each one sort of control or the excess.
Application Note: Do NOT use this electric electric motor in a nonfan program. This is a electric fan motor china completely enclosed fan electric motor and designed to have continuous ventilation over the engine casing for cooling. The casing isn’t vented and the electric motor will overheat and enter automatic thermal overload if run in a nonfan program where there isn’t solid ventilation past the electric motor. (Caution Note: the electric motor will restart immediately when it cools cool off.) Using this electrical motor for applications apart from 18 & 24″ TPI fans may possibly also overload the engine and cause it to proceed into automatic thermal overload. (Your lover blade from another manufacturer may have a steeper blade position.)
Origin: This electric electric motor is manufactured in China.