electric fan motor

Fan Motor, 1/8 hp 120V 2.2 Amp 3-Speed
General Explanation: New fan motor, taken off unused 18” or 24” China Air Compressor diameter TPI fans. Designed to operate an 18” or 24” enthusiast blade (blade NOT included).
This motor includes a (detached) cord with grounded plug, motor capacitor and a 3-speed control switch. All of the wiring in the middle of your electric motor, capacitor and quickness control change is still hooked up nevertheless the cord itself is generally detached as seen in the photos. (Find “Control Electric Fan Motor Notice” below for alter type.)
T (See “Software Notice” below for make use of in a variety of other applications.)
Dimensions: The engine body is 5” diameter and 3 ½” long (not including the shaft). The engine shaft is½” (0.500″) diameter x 2 ½” long with a collection screw simple. There are (4) threaded mounting lugs on leading of the motor, ½” long x .16 dia. with washers and nuts. The studs may actually ‘ve got 4mm threads and to become on a 117mm (4.6”)diameter circle (3 ¼” measured from one stud to another).
Rate: The approximate motor speeds (with a enthusiast blade attached):1660, 1550 and 1370 RPM. Direction of rotation (facing the shaft end of the electric motor) is Clockwise.

Control Take note: Motors will come with EITHER a 3-swiftness rotating control KNOB OR a 3-speed PULL-CHAIN SWITCH (we have demonstrated BOTH variations in the images). These two types of switches both control the engine just as (but you possess a rotating knob and you possess a pull-chain). In the event that you order several motor at a time, we can do our better to supply your purchase with each one kind of control or the excess.
Application Note: Do NOT use this electric electric motor in a nonfan software. This is a totally enclosed fan electric electric motor and designed to have continuous ventilation over the engine casing for cooling. The housing isn’t vented and the electric motor will overheat and get into automatic thermal overload if operate in a nonfan program where there isn’t solid ventilation past the motor. (Caution Note: the electrical motor will restart instantly when it cools back off.) Using this electric motor for applications apart from 18 & 24″ TPI fans may possibly also overload the motor and lead it to proceed into automated thermal overload. (Your lover blade from another manufacturer may have a steeper blade angle.)
Origin: This electric motor is produced in China.