Energy UNITS FOR DOUBLE-SCISSORS LIFT

Common Description
Outfitted together with the zero leak bidirectional checking sole-noid valves, this power unit is intended for the operation of two independent circuits. Which are respectively to the primary and subordinate platforms on the double scissors lift. Two cut-off valves are used for reducing the machine manually in situation of energy reduction. If far more independent circuits are required to your application please get hold of us for availability.
Remark: 1. Please consult our sales engineer to the distinctive pump displacement, motor power or tank capacity.
2. CSA or UL licensed motors can be found upon request.
Unique Notes
one. The AC motor is of S3 duty cycle, which could only function intermittently and repeatedly, i.e., 1minute on and 9 minutes off.
2. Clean all of the hydraulic parts concerned ahead of set up of the electrical power unit.
three. Viscosity on the oil shoud be 15~46 cst,plus the oil really should be clean and free of impurities,N46 hydraulic oil is advisable.
four. The electrical power unit really should be mounted vertically.
five. Check the oil degree in the tank immediately after the preliminary running of your energy unit.
6. Oil transforming is needed just after the initial a hundred operation hrs,afterwards when each and every 3000 hours.