Flanged Sleeve Overview

Limited Finish Float Spacer Type
The addition of plates restricts axial travel for the drive or driven shaft. The spacer makes it attainable to take out the hubs from either shaft without the need of disturbing the linked units.
Vertical Floating Shaft Form
The lower coupling includes a hardened crowned button inserted inside the plate of the reduce hub. The whole floating assembly rest within the button. Optional building of your upper coupling might be a rigid hub around the floating shaft using a flex half about the major.
Vertical Variety
This coupling has the same horsepower, RPM and misalignment capabilities as the regular couplings of corresponding sizes. A plate by using a hardened crowned button rests to the reduced shaft which supports the weight of the sleeve.
Insulated Type
Use of a non-metallic material concerning flanges and all over the bolts prevents any stray currents from one particular shaft for the other.
Jordan Style
Applied on Jordan machines and refiners, this design is similar to the slide style coupling except the lengthy hub is split and secured to the shaft by using a bolt clamp. This permits fast axial adjustment from the Jordan shafts i this hub.
Engineered Shear Pin Style
Shear pin couplings are mostly utilized to limit transmitted torque to a redetermined load. THis in turn disconnectes the driver and driven shafts if torque exceeds the specified limits. They may be especially suited to protect products when jams arise. Components are re-useable soon after pins shear. The coupling will retain lubricant for any short time period to allow products to get shut down.
Brakewheel and Brake Disc Sort
Replaceable brakewheel and brake disc piloted on the outside diameter of the normal sleeve and/or rigid hub. Offers a alternative of applying braking effort on the load or driving motor.
Double Engagement Half Gear Form
Each inner and external teeth in the single sleeve. May be bolted to a rotating flywheel, shaft or drum to connect driver or driven machine by using a shaft extension. This coupling has precisely the same options, ratings and misalignment capability as the conventional group of couplings.
Rigid Alloy Steel FARR Variety
Male/Female piloted rigid coupling coupling with keeper plates. This coupling is applied when a rigid connection is needed concerning the very low pace shaft of a gearbox as well as the head shaft of a conveyor, bucket elevator, mixer or any overhung or suspended load.