Greenhouse gear motor

The EP Greenhouse gear reducer is a compact and lightweight reduction gear reducer with a built-in limit switch system that is ideal for assembly of a locally available electric electric motor. The reducer is used in manually-controlled or climate-managed ventilation and screen systems in greenhouses. The quick and easy-to-install EP gearbox is definitely rainproof and windproof. The gearbox includes a high protection class (IP65) and can be used in an ambient temperature of 0-60 °C.

The low-noise gearbox for Greenhouse includes a gearwheel transmission and a worm wheel transmission, which are integrated in an aluminum precision housing. The self-braking worm wheel transmitting ensures that the drive shaft can be locked when the reduction gearbox isn’t running. The completely sealed reduction reducer has an expansion chamber with a diaphragm to keep the gear oil at a low pressure under all circumstances, even at high temperature ranges. Thanks to the usage of an growth chamber, the geared motor could be installed in any position. There are no restrictions, because there is no need for a bleed connect. The sealed reduction geared motor keeps the apparatus oil of the gearbox in optimal condition because of its entire operating lifetime. The geared motor is suitable for discontinuous use, working class s3-30%, with a maximum activation time of 25 minutes.

The Gear box reduction geared motor comes with an FT85 motor assembly flange, on to which the right IEC standard motor can certainly be installed (EN 50347).

The Gear box has a rotating limit switch system with operating switches and circuit breakers (NC contacts) for turning off by the end positions. The limit switch system is installed within an integrated chamber and is definitely enclosed by an impact-resistant plastic material cover. The limit switch system is accessible and easy to adjust. The limit switch system’s optimum switching range is usually 40 or 64 revolutions of the drive shaft. The cabling is linked in spring-clip connections. The gear driver comes with an IP68 M16 x 1.5 cable gland (5-9 mm cable) for the cable feed-through.

The geared motor for greenhouse comes with 16 teeth 5/8”x3/8” sprockets, keys and fasteners. The accompanying chain couplings and assembly plates are available as accessories.

Optimum drive torque of 150 Nm or 450 Nm.
Rotational speeds of 3 or 5 rpm for a mains frequency of 50 Hz or 3.6 or 6 rpm for a mains frequency of 60 Hz in the event of app of 4-pole electric motor.
Protection class IP65.
Can be used in ambient temperatures of 0-60°C.
Ideal for discontinuous use, operating class s3-30%, optimum activation time 25 moments.
Equipped as regular with 16-tooth galvanised chain coupling 5/8″x3/8″.
FT85 motor assembly flange for installation of IEC regular motor (EN 50347).
Maximum switching selection of limit switch system 40 or 64 revolutions of the drive shaft.
IP68 M16x1.5 cable gland for cable feedthrough (5-9 mm cable).