Materials Dealing with Power UNIT

Material Handling Power UNIT one
Basic Description
This energy unit is designed for the fork lift industry, consisting of highly efficient gear pump, DC motor, guide increase and decrease valve, tank, ect. The up and down movement are managed from the lever of your manual release valve, which is outfitted with an electric switch to activate the motor. The lowing velocity is managed by the pressure compensated movement manage valve.
Unique Notes
one. The duty of this power unit is S3, i.e. 30 seconds on and 270 senconds off.
2. Clean all the hydraulic parts concerned ahead of installation of the energy unit.
three. Viscosity of the hydraulic oil shoud be 15~46 cst, which really should also be clean and free of impurities, N46 hydraulic oil is encouraged .
four. Oil altering is required after the original 100 operation hours, afterwards after every 3000 hrs.
five. The energy unit proven is built to be mounted horizontally.

Materials Handling Energy UNIT two
Basic Description
This electrical power unit characteristics electrical power up gravity down circuit. Activate the start off solenoid to start the motor to lift the machine. The lowing motion is activated through the solenoid valve with the lowering speed managed through the strain compensated flow control valve. Merchandise of this series might be widely used in the marketplace of logistic products like fork lift, mini lift table, and so on.
Unique Notes
one. The duty of this electrical power unit is S3,i.e.,thirty seconds on and 270 senconds off.
two. Clean the many hydraulic components concerned ahead of mounting the electrical power unit.
3. Viscosity on the hydraulic oil shoud be 15~46 cst,which need to also be clean and no cost of impurities, N46 hydraulic oil is encouraged .
four. Oil shifting is required soon after the initial 100 operation hrs,afterwards after every 3000 hrs.
five. The electrical power unit should be mounted horizontally.