micro planetary gear motor

The micro plastic gearmotor’s Micro Planetary Gear Motor output shaft is compatible with this 14 mm wheels. We do not have any brackets for this gearmotor, and it does not possess any installation holes, but its compact size makes it simple to fasten with tape or glue. Alternatively, since this gearmotor is almost the same size as a 1/4″ fuse, it can be mounted using standard 1/4″ (6 mm) fuse clips.

Motor accessories

The next diagram shows the micro plastic gearmotor dimensions in mm. The planetary gearbox has a D-shaped plastic output shaft, which is 2 mm in diameter with a section that is flattened by 0.5 mm. The “D” part of the shaft is usually 2.5 mm long. The electric motor actions 6 mm in diameter and 9 mm in length, and the gearbox duration, labeled “L” in the diagram below, depends on the apparatus ratio. The 26:1 gearbox is 7.1 mm long, as the 136:1 option measures 9.4 mm. The motor leads come with their ideas pre-stripped and extend approximately 2 cm (0.8″) from the trunk of the motor.

Gearmotor dimensions

Because the gearmotor’s output shaft is nylon, there can be small variances in the diameter from unit to unit. These variations may cause press-match attachments like our 14 mm wheel to match loosely occasionally. If you experience a loose fit, you could attempt swapping wheels or using a small dab of glue to greatly help contain the wheel on.