PALLET TRUCK Power UNITS

Basic Description
This power unit options a long lasting magnet motor which has a energy up gravity down circuit. Activate the commence solenoid to start out the motor to lift the machine. The lowing movement is activated by the solenoid valve together with the lowering velocity controlled from the pressure compensated movement management valve. Merchandise of this series can be broadly used in the field of logistic devices such as fork lift, mini lift table, etc.
Particular Notes
one. This electrical power unit is of S3 duty cycle, i.e.,non-continuous operation, 30 seconds on and 270 seconds off.
2. Clean all of the hydraulic parts concerned ahead of installation of the power unit.
three. Viscosity of the hydraulic oil shoud be 15~46 cst, which must also be clean and cost-free of impurities. N46 hydraulic oil is advised.
four. This electrical power unit is built to be mounted vertically.
five. Check the oil degree while in the tank immediately after the 1st star from the electrical power unit.
six. Oil changing is needed just after the first 100 operation hrs,afterwards as soon as each 3000 hrs.
seven. More pump sizes and tank sizes are avaiable upon request.