Shaft Clamp

All EPT shaft collars, including quick-clamping collars, are sole point faced to ensure perpendicularity and proper alignment. This critical manufacturing stage assures precise shaft collar deal with to bore relationship leading to correct component positioning on the shaft and actually pressure on interfaced parts.
Quick-clamping shaft collars from EPT are made of high quality aluminum with type-II sulfuric anodized finishes, with a dark finish about the collar and a gold finish upon the clamping lever for added visibility. Light weight aluminum collars are corrosion resistant, lighter than various other metals, have low inertia and also have nonmagnetic properties. All EPT items happen to be RoHS and REACH compliant. Available standard sizes for the quick-clamping shaft collars are 0.375” to 1 1.5” in the inch series and 8 mm to 38 mm in the metric series.
Shaft Collar, System of Measurement Inch, Shaft Locking Type – Couplings 1 Piece Quick Clamp, Bore Type – Collars Simple Bore, Bore Dia. 3/8 In., Material – Collars Black Anodized 6061 Aluminum, Outside the house Dia. 1-1/2 In., Width .394 In., Clearance Dia. 1.496 In., Screw Size M3, Screw Material 18-8 300 Series STAINLESS, Operating Temp. Range -40 Degrees to 200 Degrees F, Specifications RoHS2 Compliant, REACH Compliant
The Shaft Collar 1×3/8, 1/2″ for Key Shaft is made from lightweight Aluminum, both piece design allows you to install these collars anywhere on a shaft without removing components. Furthermore to Shaft Clamp china reducing the entire weight, the flats permit you to rotate a shaft without marring or gouging the shaft. Simply place the collar on the shaft and tighten the two socket-brain cap screws to protect the collar and a wrench and become positioned on the collar’s flats to rotate the entire shaft/collar assembly.
Made of lightweight Aluminum
Allows you to install these collars anywhere on a shaft without removing components
Just place the collar in the shaft and tighten the two socket-head cap screws to secure the collar
Flats allow you to rotate a shaft without marring
Climax Part C-056-S Collection Screw Collar is made with T303 Stainless Steel, which is effective in corrosive environments. Dimensions are 9/16 in. Bore, 1 in. OD, 7/16 in. Width. It is successful on hard and soft shafts. This is a Affordable collar design, and Very easily installed where major disassembly would normally be required.
EPT quick clamping shaft collars collar clamp hinge buy manufacturing 2 1 8 in steel,shaft collar clamp power manufacturing steel vex clamping design,vex clamping shaft collar collars an individual part with lever clamp hinge,vex clamping shaft collar clamp 3d model production quick 1 3 8 in alum,EPT speedy clamping shaft collars collar clamp 2pc 1 in metal stainless split with lever,climax metallic s shaft collar two part clamp style EPT quick clamping collars 2laptop or computer 1 in steel pressure,clamp upon shaft collars couplings universal clamping collar design with mounting holes 2pc 1 in steel,shaft collar clamp force clamping calculation quick connect collars at best cost in,clamp shaft collar clamping collars drive calculation quick connect,stainless steel twice split shaft collar with speedy clamping clamp hinge drive calculation.
Black Oxide Plated Metal One-Piece Clamping Collar.
Recessed Screw Head provides an outside surface free of key projections for safety.
Design totally engages the shaft without marring.
Greater axial holding vitality than established screw collars.
Effective on hard & soft shafts.
Indefinitely adjustable and simple to remove, one-piece clamping collars are usually applied to hard or very soft standard round shafts, above a split hub or on thin wall tube. Through the use of friction to supply superior grip on bars and shafts, one split collars present sturdier, more reliable results when compared to the set screw design of solid collars. They also offer tremendous axial vitality, while minimizing shaft distortion for superior performance and decreased wear and tear.

The collar clamping mechanism works fast and successfully with simple palm opening of the integral clamping lever, positioning the collar on the shaft, and closing the lever flush with the external surface area of the collar. The design of the cam on the lever and the mating machined surface area on the collar assure a good fit with a optimum axial load of 35 to 120 lbs / 133 to 489 N based on the collar bore size. In circumstances where higher holding ability can be or clamp axial load is necessary, the quick-clamping collar is not the recommended decision. EPT offers a full line of industry-leading one-piece and two-part shaft collars created for these applications.