Shaft Clamp

All EPT shaft collars, including quick-clamping collars, are sole point faced to make sure perpendicularity and proper alignment. This critical manufacturing stage assures precise shaft collar encounter to bore relationship resulting in correct component positioning on the shaft and also pressure on interfaced ingredients.
Quick-clamping shaft Shaft Clamp Collars from EPT are made of high quality light weight aluminum with type-II sulfuric anodized finishes, with a black finish on the collar and a precious metal finish on the clamping lever for added visibility. Aluminium collars are corrosion tolerant, lighter than various other metals, have low inertia and have non-magnetic properties. All EPT goods will be RoHS and REACH compliant. Available typical sizes for the quick-clamping shaft collars happen to be 0.375” to 1 1.5” in the inches series and 8 mm to 38 mm in the metric series.
Shaft Collar, System of Measurement Inch, Shaft Locking Type – Couplings 1 Piece Quick Clamp, Bore Type – Collars Basic Bore, Bore Dia. 3/8 In., Material – Collars Black Anodized 6061 Aluminum, Exterior Dia. 1-1/2 In., Width .394 In., Clearance Dia. 1.496 In., Screw Size M3, Screw Material 18-8 300 Series Stainless Steel, Operating Temp. Selection -40 Degrees to 200 Degrees F, Criteria RoHS2 Compliant, REACH Compliant
The Shaft Collar 1×3/8, 1/2″ for Key Shaft is constructed of lightweight Aluminum, the two piece design permits you to install these collars anywhere on a shaft without removing components. Furthermore to reducing the entire weight, the flats let you rotate a shaft without marring or gouging the shaft. Simply place the collar on the shaft and tighten the two socket-brain cap screws to safeguarded the collar and a wrench and become positioned on the collar’s flats to rotate the entire shaft/collar assembly.
Manufactured from lightweight Aluminum
Permits you to install these collars anywhere on a shaft without removing components
Basically place the collar in the shaft and tighten both socket-head cap screws to secure the collar
Flats allow you to rotate a shaft without marring
Climax Part C-056-S Establish Screw Collar is made with T303 STAINLESS, which works well in corrosive environments. Sizes happen to be 9/16 in. Bore, 1 in. OD, 7/16 in. Width. It is effective on hard and gentle shafts. It is a Cost effective collar design, and Very easily installed where significant disassembly would in any other case be required.
EPT speedy clamping shaft collars collar clamp hinge acquire manufacturing 2 1 8 in steel,shaft collar clamp pressure manufacturing steel vex clamping style,vex clamping shaft collar collars a single part with lever clamp hinge,vex clamping shaft collar clamp 3d model making quick 1 3 8 in alum,EPT quick clamping shaft collars collar clamp 2pc 1 in metal stainless split with lever,climax steel s shaft collar two part clamp style EPT quick clamping collars 2computer 1 in steel pressure,clamp on shaft collars couplings universal clamping collar design and style with mounting holes 2pc 1 in metal,shaft collar clamp force clamping calculation quick hook up collars at best price in,clamp shaft collar clamping collars power calculation quick connect,stainless steel dual split shaft collar with speedy clamping clamp hinge push calculation.
Black Oxide Plated Metal One-Piece Clamping Collar.
Recessed Screw Head has an outside surface free from significant projections for safety.
Design fully engages the shaft without marring.
Greater axial holding ability than establish screw collars.
Effective on hard & soft shafts.
Indefinitely adjustable and simple to remove, one-piece clamping collars are typically applied to hard or very soft standard round shafts, above a split hub or in thin wall tube. By using friction to supply superior grip on bars and shafts, single split collars offer sturdier, more trustworthy results in comparison with the set screw design of solid collars. They also offer tremendous axial electrical power, while reducing shaft distortion for top-quality performance and decreased deterioration.

The collar clamping mechanism works fast and successfully with simple hand opening of the integral clamping lever, positioning the collar on the shaft, and closing the lever flush with the outer area of the collar. The design of the cam on the lever and the mating machined surface on the collar assure a tight fit with a maximum axial load of 35 to 120 lbs / 133 to 489 N according to the collar bore size. In situations where higher holding power is normally or clamp axial load is required, the quick-clamping collar isn’t the recommended decision. EPT offers a comprehensive line of industry-leading one-part and two-part shaft collars suitable for these applications.